Stair base cabinet heavy duty slide

Stair base cabinet heavy duty slide

Комментариев: 0
Install cabinets at the bottom of the stairs. I believe many people know that many decorations will be at the bottom of the stairs + a few cabinets to facilitate storage of things, such as shoes, clothes, tobacco and alcohol. There will be more gaps at the bottom of the stairs at home. Yes, many people will install cabinets at the bottom of the stairs, one is to put things in multiple spaces, and the other is to look good. It won't look so sloppy.

Many people find it difficult to install cabinets on stairs. In fact, it is not very troublesome. Many netizens don't know how to install them and choose suitable slide rails. So here is the editor for you to analyze the knowledge of the purchase of slide rails and the installed community and the purchase of stair cabinet slide rails.



Several points of attention when buying cabinet slides

1: The load-bearing capacity of the slide rail 2: The specification length of the slide rail 3: The height of the slide rail (installation gap) 4: Installation and use



One: The load-bearing capacity of the slide rail is up to 120kg. Installed in a cabinet can store a lot of items, so don’t worry about the sliding rails.

Two: There are two pull-out lengths for each length of the slide rail. The length of the slide rail cannot exceed the depth of the cabinet. The depth of the cabinet is different for each reader.

3: Installation height, this is an important point; the cabinet is installed with slide rails, because the slide rails are installed at the bottom of the cabinet, so when customizing the cabinet, remember to reserve the height of the slide rail at the bottom, and the height of the slide rail itself It's 5.38cm, the cabinet reserved in the editor's home is 5.38cm in height

Four: After knowing the specifications; should the cabinet be installed at the bottom of the stairs?



1. Tips for installing stair rails? What are the specific installation steps? Answer: The stair slide is a non-removable slide. The installation steps are as follows:

One: Install the slide rail at the bottom of the cabinet first.

Two: Lift the cabinet and place it to the position to be installed, pull out the cabinet, and install the screws on the ground. This completes the installation.

I always thought it was difficult to install, but I knew it after reading this text

Hidden Bottom Drawer Slide

Introduction and Application of Rebound Slide

Комментировать